fbpx
 

Maxi Roof Coating

Maxi Roof Coating is a one pack, economical, flexible waterproof roof coating with good weather resistance, ideally suited for use in areas with extreme climatic conditions.

Application Method: Phun
Grades: Gốc nước Flex

Product Overview

Maxi Roof Coating is a one pack, economical roof coating. It provides a flexible waterproof coating with good weather resistance. Maxi Roof Coating has good flexibility and is ideally suited for use in areas with extreme climatic conditions. It is applied by brush, spray or rubber squeegee.

Properties

Maxi Roof Coating is a blend of weather resistant pigments, fillers and styrene acrylic ester resins. Maxi Roof Coating offers the following benefits:

  • Waterproof coating.
  • Allows surface to breathe while remaining strongly anchored to the substrate.
  • Provides a seamless coating.
  • Good solar reflectivity
  • Economical
  • Fast drying.
  • Reflects Ultra-Violet (light) rays.

Areas Of Use

Maxi Roof Coating is designed for application on roofs constructed from a wide variety of materials, i.e. concrete, light weight concrete, roof tiles, wood, galvanised steel, asphalt and asbestos cement. Maxi Roof Coating is also recommended as a UV protective coating for closed cell polyurethane foam roof insulation

Application Method

Preparation

Ensure dust, dirt and foreign matters are removed from roof surfaces. All cracks should be made good with Terraco Acrylic Filler. Before coating over old substrates in humid tropical areas, surfaces should first be washed down with a solution of household bleach 12 hours before re- coating, to prevent the re-growth of fungi and algae.

Priming

If substrate is porous, it is best to use Terraco Penetrating Primer Clear or diluted Terrabond A (1:3 with water) prior to Maxi Roof Coating application.

Application

Maxi Roof Coating can be applied by brush, spray or rubber squeegee, embedding glass fiber scrim in areas which require reinforcement. Allow to dry and apply another coat to give an overall consumption of approximately 1.2-1.5kg/m2. Do not apply if rain is likely over the next 48 hours, as Maxi Roof Coating is not resistant to rain until fully dry.

Maxi Roof Coating is not suitable for areas of prolonged water saturation/ ponding – ensure the roof has a 1:75 slope and proper drainage. When applying over PU foam roof insulation, Maxi Roof Coating should be applied after 4 hours but within 24 hours of PU foam application.

Clean tools and equipment with water after use.

Available Grades

Product Name Product Code
Maxi Roof Coating 66510