fbpx
 

Blockfix™

Blockfix™ is a specially developed thin joint and repair mortar used for adhesion between ALC blocks.

Application Method: Trowel
Grades: Cementitious

Product Overview

Blockfix™

Blockfix™ is a specially developed thin joint and repair mortar used with ALC blocks. These thin-application products are produced to provide reliable adhesion while helping to minimise thermal bridging and other problems commonly associated with traditional mortars.

It is available in two colours, grey and white. A cementitious specially formulated thin joint and repair mortar used with ALC blocks. This ensures that the joint width is kept to a minimum hence eliminating the cause of thermal bridging associated with traditional mortars.

Properties

  • Extended open time.
  • Minimum joint width, reducing plastering costs and thermal bridging.
  • Formulated specifically for ALC block laying.
  • Excellent adhesion.

Areas Of Use

Blockfix™ is a specially developed thin joint and repair mortar used with ALC blocks.

Application Method

Preparation of surfaces

Ensure the ALC surface is free from loose particles, dust, dirt, grease and oil. Surface should be moistened with water immediately prior to application of BlockfixTM ALC.

Mixing

Mix thoroughly with the recommended amount of water, with a high speed mixer or with a hand agitator for 3 – 5 minutes. Let the material stand for 5 minutes prior to application.

Application & cleaning of tools

Apply the BlockfixTM ALC to the ALC surface using a mortar applicator or notched trowel to approx. 3 mm thickness. Place the blocks into the mortar ensuring good contact. Check the level and continue with next block. Remove excess material with a wet sponge before setting.

Clean tools and equipment with water after use.

Available Grades

Product Color Code
Grey 75310
White 75311