Handyspray FC is an acrylic based, ready to use compound for application as stucco filler and skimcoat on all common types of interior building surfaces.
Handyspray FC is an acrylic based, ready to use compound for application as stucco filler and skimcoat on all common types of interior building surfaces. It has an extra fine particle size to give a high quality even surface for painting. Handyspray FC is suitable for both precast and conventional buildings. The finished surface does not require priming before painting.
Properties
Handyspray FC has the following properties:
Easy to use
Good whiteness
Does not flake off
High adhesion power
High coverage
Quick drying
Vapour permeable
Low VOC
Areas Of Use
Pre-cast or fair-faced concrete
Sand/cement render
Gypsum or cement fibre board
Cementitious materials
Wood
Suitable for skimming over other Handycoat / Sprayplaster grades
Application Method
Surface Preparation
Ensure that dust, dirt and foreign matter are brushed away. Ridges and form oil must also be removed.
Priming
The use of Terraco Terrabond A solution as a primer (1:5 parts with water) is recommended on dusting or flaking surfaces.
Application
Apply the filler in a thin even layer. Apply two or more coats if necessary, allowing it to dry between layers. Lightly sand down the final surface before painting, preferably within 24 hours of application.
Gulf 
