Product Overview

Terrascreed EX500 is a semi self-levelling floor compound suitable for interior and exterior use on concrete floors and screed prior to application of final floor finish such as ceramic tile, natural stone, etc.

The application thickness can vary, ranging from 5mm to 30mm. It can be used in balconies, garage floors, walkways, paths, patios, and other
concrete surfaces with normal foot traffic.

Properties

Terrascreed EX500 has the following properties:

• Levelling Compound
• High Strength
• Crack Resistant
• Excellent adhesion

Areas Of Use

• Car parks, garage, and workshops
• Paths, walkways, concrete floors & roofs
• Residential and commercial buildings
• Can be use for levelling existing concrete pavements, terrazzo, ceramic, or natural stone after a good surface preparation and priming.

Application Method

Surface Preparation 

All surfaces should be clean, dry, and free from grease, laitance, oil, dust, paint and any other substance that may prevent or reduce adhesion.

Priming

Apply one coat of Terrabond A solution (diluted with water 1:5 ratio) as a primer prior to application of  Terrascreed EX500. On extremely absorbent, porous surfaces or under extreme climatic conditions, apply 2-3 coats of primer.

Mixing

Terrascreed EX500 is to be mixed in full bag quantity. Do not mix partial bags. Each 25kg bag of Terrascreed EX500 is to be mixed with 3 – 3.5 liters of clean and cool water.

Application 

• Pour the Terrascreed EX500 onto the prepared surface, then immediately spread it with a large metal trowel to aid in leveling and smoothing the surface.
• A porcupine roller is then rolled through the laid material to remove air pockets
• Terrascreed EX500 will flow out to find the correct level. Corners and edges to work with trowel.
• Terrascreed EX500 can be applied between 5mm to 30mm thickness depending on the requirements.

Downloads

Terrascreed EX500

Available Grades