Product Overview

Stucco Vintage Roma is a decorative wall finish designed to give the appearance of a natural cast concrete wall. It is easy to apply and has excellent vintage effects. With Stucco Vintage Roma a range of attractive patterns can be achieved, depending on application methods. Stucco Vintage Roma has a dual textured colour, good workability and durability. The product is designed for exterior application.

Properties

Stucco Vintage Roma is a blend of unique and precisely graded fillers and binding materials to provide the following enhanced properties:

• Concrete effects
• Various attractive patterns
• Low odor
• Non-toxic
• Excellent exterior durability

Areas Of Use

Stucco Vintage Roma can be used on most exterior surfaces such concrete, render, cement board and EIFS substrates.

Application Method

Surface Preparation:

New surfaces:
Ensure that all dust, dirt and foreign matter are scraped and brushed away. Also ensure the surfaces are free from salts, oil, grease and ridges. Protect all adjacent surfaces not to be covered. All cracks, chips, voids and damages should be repaired with Terraco Acrylic Filler.

Old surfaces:
Before applying to old surfaces, ensure the substrate is firm. First wash down the surface with a sugar soap solution, rinse and allow to dry before repairing or applying the primer. Prime plywood surface. Levelling can be done with Terraco Acrylic Filler or Terramix.

Priming
All surfaces should be primed with Terraco P Primer Pigmented.

Application:
Apply a first coat in a thin layer by trowel and allow to dry. Apply a second heavier coat by trowel. Apply a mist coat of water when the coating is semidry. Finally, use a trowel to achieve the desired finish.

Top coat can be applied when surface is completely dry using Terracoat Topcoat Clear.

Clean tools and equipment with water after use

Downloads

Stucco Vintage Brochure

view now

Available Grades