Terraco offers wide range of finishing and repair products that are ideal for use in Airports, Hospitals & Schools.
Handycoat Interior is a general purpose ready-mixed skimcoat and jointing compound for levelling interior masonry and gypsum board surfaces.
Handycoat Exterior is a ready-mixed skimcoat for levelling exterior masonry and cement fibre board surfaces.
Handycoat GJC (Gypsum Joint Compound) is a premium skimming & jointing compound for gypsum boards (walls & ceilings)
Handycoat ACP is a ready-mixed skimcoat for cold surfaces to minimise condensation problems.
Handycoat Ez-Roll is a ready-mixed skimcoat for leveling interior masonry and gypsum board surfaces designed for roller application.
A high performance anti-carbonation coating for exterior and interior application over a suitably prepared substrate as per Terraco anti-carbonation systems.
An acrylic based Venetian stucco suitable for use on most interior surfaces, which can be applied to produce both traditional and modern effects by adjusting the application methods. The final effect is a translucent highly polished finish.
General purpose pigmented primer suitable for tinting to match the finish colour
Velvetex is an antique, velvet effect coating used for interior surfaces to create luxurious warm interior walls.
Superwood™ is a high-quality exterior decorative wall finish which replicates the appearance of wood.
A premium quality, mid-sheen, exterior masonry decorative topcoat finish which provides a unique metallic lustre finish.
Stucco Vintage Roma is used to replicate exposed / off-shutter concrete for exterior walls. It is available as a ready-mixed product in 4 shades.
Stucco Vintage Venezia is a ready-mixed interior decorative wall coating which replicates the appearance of exposed concrete.
General purpose, non-slump ceramic and mosaic tile adhesive for use on all type of dimensionally stable masonry substrates such as sand/cement render, precast concrete etc. EN Classification C1T
General purpose, non-slump ceramic and mosaic tile adhesive for use on all type of interior walls such as gypsum board, cement based render, tile backer board.
EN Classification D1T
Ultracrete is a two component, flexible, positive-negative pressure waterproofer
Maxi Tile Paste is a ready-mixed, economical, high quality, all-purpose acrylic adhesive for tiles and clinkers.
Sprayplaster BC is a spray applied basecoat levelling plaster used on all common types of interior building surfaces to level and rectify irregularities. Available in Beige and Natural White.
Terraco Sprayplaster Finishcoat is an acrylic based, low VOC, ready to use compound of inert filler materials, for use on all common types of interior building surfaces
Terramix Fine is a repair mortar and thin layer plaster for repairs and levelling up to 1 – 3mm thickness.
Terramix Standard is a polymer modified, cementitious, masonry repair mortar / plaster ideal for repairs and levelling up to 3 – 5mm thickness.
Terramix Coarse is a polymer modified, cementitious, masonry repair mortar / plaster ideal for repairs and levelling up to 5 – 15mm thickness.
Weathercoat GP is a high quality, versatile, permanent waterproofing system for roofs, facades, wet rooms and water retaining structures.
Flexicoat is a liquid acrylic elastomeric waterproof coating for roofing applications
Maxi Roof Coating is a one pack, economical, flexible waterproof roof coating with good weather resistance, ideally suited for use in areas with extreme climatic conditions.
Terraco Terraseal™ is a non bituminous, weather resistant, moisture barrier & vapour permeable, permanent waterproof coating for facades.
Silcoat WB is a specially formulated water repellent for building facades, based on innovative water-borne technology to enable it to penetrate deep into the substrate thereby protecting the building from the damaging effects of water.
Terol Granule is a trowel applied mineral based decorative render with a medium grain finish.
Terol Coarse is a trowel / spray applied mineral based decorative coating with a coarse Tyrolean finish. It is recommended as a finish for Terraco EIFS.
Terol Smooth is a spray applied mineral based, decorative render with a fine finish.
A trowel applied mineral based decorative render with a 2mm / 3mm alpine scratch finish. Recommended as a finish for Terraco EIFS.
A quick setting polymer modified coloured mineral render with a controlled setting time to ensure early rain resistance and to avoid problems associated with wash-out.
A highly technically advanced system, this product is a pure acrylic water-in-water multi-colour coating which is designed to realistically simulate granite stone. Suitable for use on general masonry and Terraco EIFS.
A medium build spray applied stone effect coating suitable for general masonry and Terraco EIFS.
Incorporates the use of natural graded aggregate from the finest natural quartz crystals to create an attractive natural pebble-dash finish suitable for general masonry and Terraco EIFS.
A medium-high build trowel applied granular marble coating suitable for general masonry and Terraco EIFS.
A medium-high build spray applied granite effect coating suitable for general masonry and Terraco EIFS.
Terracoat Excel is a trowel applied texture giving an alpine scratch finish. It is available in 3 grain sizes.
A trowel applied textured coating with a 1mm and 2mm even granular finish. Recommended as a finish for Terraco EIFS.
A filled granular finish using a combination of aggregates tinted to almost any colour, allows Terracoat Granule Filled to create the illusion of texture while not appearing to be porous.
A trowel applied textured coating with a 1mm and 2mm filled granular finish. Recommended as a finish for Terraco EIFS.
Terracoat Suede is a medium build decorative textured coating applied by trowel with a suede effect finish. Recommended as a finish for Terraco EIFS.
A medium build textured coating applied by roller / spray – the medium build spray finish is most popular.
A fine to medium build textured coating applied by roller / spray with a sand grain finish.
Available in over 1000 colours.
A multi-textured coating applied by spray / roller and spatula to achieve various patterns from fine spray to roller stucco.
A fine, low build textured coating applied by roller with a fine even stipple finish.
A high build textured coating applied by roller / spray with a high profile decorative finish.
Terracoat G is a low build roller applied lightly grained textured coating. Consumption rates are low making it a very economical finish.
A low profile textured coating applied by roller with a lightly grained even finish
Terraco Acrylic Crack Filler is a permanent, flexible, ready mixed, crack repair compound which does not flake off and retains adhesion.
Flexishield is a mid-sheen elastomeric performance paint for exterior substrates with excellent crack bridging properties.
Terracoat Stain is ready-mixed, elastomeric pigmented coating, especially designed as a topcoat for cementitious acrylic textured coatings such as our decorative renders.
It can also be used to overcoat pigmented and non-pigmented Terracoat Textured Coatings.
Terratop High Sheen is a premium quality gloss sheen interior emulsion paint with excellent washability and superior coverage.
Addagrip is a range of quality Resin Surfacing Systems used internally and externally. These flooring and … Continue reading "Airports, Hospitals & Schools"
Terraco AmbientTM is a range of high-performance acoustic plastering compounds, available in dry-powder and ready-mix … Continue reading "Airports, Hospitals & Schools"
The major causes of concrete decay in reinforced concrete is carbonation caused by Carbon Dioxide … Continue reading "Airports, Hospitals & Schools"
Superior Performance for Sports Surfaces Flexipave® Sports Flooring Systems are one of the more unique … Continue reading "Airports, Hospitals & Schools"
Terraco’s bestselling EIFS Alpha system, often specified by architects and consultants alike for new and renovations projects, uses EPS (Expanded Polystyrene) as the insulation material.
MW (Mineral Wool) is a popular thermal insulation system often used when enhanced breathability or fire resistance is required, such as in moisture-prone or older buildings. The Perma system uses highly vapor-permeable decorative renders like Terracoat Sil or Terol for a breathable finish.